Decorative brick-look and stone-look tiles come in two main kinds: plaster and concrete tiles. In photos they look almost identical, but in real life they behave differently: they weigh differently, they are cut with different tools and, above all, they suit different places. We sell TEXARA plaster tiles; concrete is not in our range. So here is an honest view of where gypsum wins and where you need concrete.

In short
- Plaster (gypsum) — light, cut with hand tools, can be painted any colour. Only for dry indoor rooms.
- Concrete — heavier and more impact-resistant, usually coloured through. Depending on the product, it can also suit wet zones or outdoors — check the manufacturer's instructions.
- A feature wall in the living room, bedroom, hallway or office — plaster is usually simpler and more convenient.
- Façade, shower area, terrace — only a material made for that purpose, which means not gypsum.
Plaster or concrete tiles: eight criteria compared
| Criterion | Plaster tile | Concrete tile |
|---|---|---|
| Weight | light | noticeably heavier |
| Cutting | a saw, or even a knife for thin tiles; little dust | usually an angle grinder with a disc; a lot of dust |
| Where it can go | dry indoor rooms | per the manufacturer's instructions: some products suit wet zones and outdoors |
| Colour | white, painted any colour after installation | coloured through or a painted surface |
| Chips | visible on a painted surface; easy to fill and touch up | less visible if coloured through |
| Impact strength | lower | higher |
| Adhesive | gypsum-based or acrylic | the adhesive named by the concrete tile manufacturer |
| DIY | easy | possible, but harder because of the weight and the cutting |
We do not give specific figures for concrete tiles: they vary widely between manufacturers. Compare with the data on the page of the specific product.
Weight: how much can your wall carry
For plasterboard, old plaster or a partition wall, the weight of the cladding matters. The approximate coverage weight of our plaster tiles, based on pack weight and pack area, without adhesive:
| Model | Look | Size, mm | Per pack | Coverage weight |
|---|---|---|---|---|
| EasyBrick | brick look | 210 × 65 × 7 | 22 pcs · 0.35 m² | ≈ 2.6 kg/m² |
| Delta | brick look | 290 × 52 × 20 | 12 pcs · 0.25 m² | ≈ 6.1–6.5 kg/m² (tiles only, joint 15–18 mm) |
| Canyon | brick look | 258 × 86 × 26 | 8 pcs · 0.18 m² | ≈ 10.8 kg/m² |
| Lofoten | stone look | 300 × 92 × 20 | 12 pcs · 0.33 m² | ≈ 6.8 kg/m² |
| Alpine | stone look | 205 × 76 × 23 | 12 pcs · 0.19 m² | ≈ 7.7 kg/m² |
| Tyrol | stone look | 400 × 180 × 25 | 5 pcs · 0.32 m² | ≈ 8.7 kg/m² |
A concrete tile of the same format weighs more, because concrete is denser than gypsum. Check the exact weight on the page of the specific concrete product.
Cutting and dust
Gypsum is cut with a fine-tooth saw, and the thinnest, EasyBrick, even with a utility knife. There is little dust, so you can cut right in the room (wearing goggles and a dust mask, with the window open).
Concrete is usually cut with an angle grinder and a diamond disc. That means a lot of fine dust and noise, so it is better to cut outdoors or with a vacuum extractor, wearing a dust mask and hearing protection.
If the wall has many windows, sockets and corners, the difference in effort is noticeable.
Where they can go
This is the main criterion — and here gypsum loses.
Plaster tiles are for indoor use only in dry rooms: living room, bedroom, hallway, study, office, café. Gypsum absorbs water and is weakened by it; paint does not protect it from water.
Concrete tiles — it depends on the product. Some manufacturers allow their products in wet zones, on terraces and on façades, with the right adhesive and sealer. Check this in the instructions of the specific product, not in the advertising.
Rule of thumb: if water or frost can reach the wall, do not choose gypsum.
Colour and painting
Gypsum is white. That is freedom: you paint it any colour after installation, you can make the joint a contrasting colour, and a few years later you can repaint. The downside: painting is a must, because unprotected gypsum soaks up dirt.
Concrete is often coloured through. No painting is needed and a chip is barely visible. But changing the colour later is harder, and the shade of a batch may differ slightly from the photo.
Strength and repair
Concrete is more impact-resistant — an honest advantage in busy passageways. Gypsum can chip from a knock, but the repair is simple:
- Clean up the chip.
- Fill it with gypsum filler and shape the texture.
- Prime and touch up with the same colour.
So it is worth keeping the leftover paint after installation.
What to check on the product page before you decide
Whatever the material, look for these on the product page:
- intended use — indoor only, or also wet zones and outdoors;
- pack coverage and whether it includes the joint;
- pack weight — to estimate the load on the wall;
- the type of adhesive the manufacturer recommends;
- whether painting or sealing is needed after installation.
If any of this is missing from the page, ask the seller before you decide.
When plaster is the right choice
- a feature wall in a dry living or office space;
- a light substrate: plasterboard, a partition, old plaster;
- you want your own colour or plan to repaint;
- you are doing it yourself without professional tools;
- a wall with many openings and corners.
When you need concrete or another material
- façade, terrace, unheated balcony;
- a zone with direct water or splashes;
- places with a high risk of knocks where chips are unacceptable;
- a spot next to an open fire or a stove — then the material and the distance are set by the regulations for stoves.
Common mistakes
| Mistake | Consequence | How to avoid it |
|---|---|---|
| Gypsum outdoors or in a wet zone | The tile softens and breaks down | Dry indoor rooms only |
| Choosing from photos | Different weight, different installation | Compare the product pages |
| Not painting gypsum | It darkens and soaks up dirt | Primer and paint after installation |
| A heavy tile on a weak substrate | Delamination | Check the substrate and the weight |
Further reading
- Stone-look tiles in plaster: how to choose the texture
- A white brick wall in the interior: how to create it with plaster tiles
- Gypsum, wood, felt, PVC, MDF: wall panel materials compared
How to get a quote
- Open the tile's product page and enter the wall area in the coverage calculator — it works out the number of whole packs.
- Add them to the quote list and press Request a quote — there is no obligation to pay.
- We will send you a quote including shipping (we deliver to the Netherlands, Belgium and the rest of the EU). If it suits you, payment is in advance by bank transfer; we ship once payment is received.